Setting of Ejection Speed on Toshiba Injection Molding Machine
[1] Setting of ejection speeds [VE1] and [VE2] Open respective setting windows to set ejection speeds [VE1, VE2] (mm/s) and ejection speed shift position [LS31A].The case of ejector speeds-step shift control shown on the right is used to eject a product at low speed first and eject at high speed after releasing from the mold to prevent crack on the product.
When repeated, speeds of the second and later ejection become VE2.
By following the same manner as above, open the setting window on the [CLAMP] screen to set ejector retraction speed. Speeds of the second and later ejection become the same as the first ejection.
