Ejection Force Setting on Toshiba Injection Molding Machines

Home → Injection Machines Instruction Manual → Ejection Force Setting on Toshiba Injection Molding Machines

Administrator On December 30, 2019 / Injection Machines Instruction Manual

Ejection Force Setting on Toshiba Injection Molding Machines

[1] Setting of ejection force

Open the setting window on the [EJECT] screen to set the ejection force [PEJ].

1) Touch [PEJ] (ejection force) on the [EJECT] screen to open the [PEJ EJECTION FORCE] setting window.
2) Set the required ejection force (kN ) in the step switch on the window. Generally set the maximum ejection force.
3) Touch [x] (close) to close the window.
Ejection Force Setting on Toshiba Injection Molding Machines

NOTE: Setting the ejection force to lower level may interrupt the ejection movement.
When ejection speed is set to high speed, especially, set the ejection force to the maximum value.