How to Clean the Air Filter in Injection Molding Machines

How to Clean the Air Filter in Injection Molding Machines

Air filters are installed to prevent the invasion of dust into the control cabinet or control station. Internal filters, if clogged because of fouling, interrupt sufficient air supply or exhaust from the control cabinet or control station. This prevents the plastic molding machine from exhibiting full performance or results in failure of internal electric apparatuses as a result of internal temperature rise. Hence clean filters periodically.

Clean air filters by following the procedure below.
1) Detach the lids of air filters on the control cabinet and control station.
(The photo shows the example of the control cabinet.)
How to Clean the Air Filter in Injection Molding Machines

Fit a screwdriver into the detaching hole provided on the side face of the air filter to detach the lid.
how to take out the filter placed inside of Air Filter in Injection Molding Machines

2) Take out the filter placed inside.

3) Clean the filter by water washing or vacuuming. Dry sufficiently after water washing. Replace the filter if fouled excessively.

4) Fit the filter on the control cabinet or control station after cleaning.

By TOSHIBA MACHINE CO.,LTD.   

Feel Free to Contact Us if Any Questions

    Subscription

      Contact Us

      Alleycho Precision Mold Technology Co., Ltd
      Factory: B1 Intelligent Industrial Park, Hongling Road, Nanhai, Foshan, Guangdong,China 528000
      Tell: +86-757-8230 4858

      Office: Room 404, Longxin mansion, No.500 LongXi Road, Liwan District, Guangzhou, China
      Tell: +86-181 9895 1483

      Email:  info[@]alleycho.com